1-9 A-D E-G H-M N-P Q-S T-Z

PLURAFAC LF 7319

PLURAFAC LF 7319

 

 

Synonyms:
PLURAFAC LF 7319; PLURAFAC LF7319; PLURAFACLF 7319; PLURAFACLF7319; PLURAFAC 7319; PLURAFAC LF; PLURAFAC LF 7319; PLURAFAC® LF 7319; PLURAFAC®-LF 7319; PLURAFAC® LF-7319; plurafac lf 7319; plurafac lf7319; plurafaclf 7319; plurafaclf7319; plurafac 7319; plurafac lf; plurafac lf 7319; plurafac® lf 7319; plurafac®-lf 7319; plurafac® lf-7319; Plurafac Lf 7319; Plurafac Lf7319; Plurafaclf 7319; Plurafaclf7319; Plurafac 7319; Plurafac Lf; Plurafac Lf 7319; Plurafac® Lf 7319; Plurafac®-Lf 7319; Plurafac® Lf-7319; PLURAFAC LF 7319; PLURAFAC LF7319; PLURAFACLF 7319; PLURAFACLF7319; PLURAFAC 7319; PLURAFAC LF; PLURAFAC LF 7319; PLURAFAC® LF 7319; PLURAFAC®-LF 7319; PLURAFAC® LF-7319; PLURAFAC LF 7319; PLURAFAC LF7319; PLURAFACLF 7319; PLURAFACLF7319; PLURAFAC 7319; PLURAFAC LF; PLURAFAC LF 7319; PLURAFAC® LF 7319; PLURAFAC®-LF 7319; PLURAFAC® LF-7319; plurafac lf 7319; plurafac lf7319; plurafaclf 7319; plurafaclf7319; plurafac 7319; plurafac lf; plurafac lf 7319; plurafac® lf 7319; plurafac®-lf 7319; plurafac® lf-7319; Plurafac Lf 7319; Plurafac Lf7319; Plurafaclf 7319; Plurafaclf7319; Plurafac 7319; Plurafac Lf; Plurafac Lf 7319; Plurafac® Lf 7319; Plurafac®-Lf 7319; Plurafac® Lf-7319; PLURAFAC LF 7319; PLURAFAC LF7319; PLURAFACLF 7319; PLURAFACLF7319; PLURAFAC 7319; PLURAFAC LF; PLURAFAC LF 7319; PLURAFAC® LF 7319; PLURAFAC®-LF 7319; PLURAFAC® LF-7319; PILERUAFAC LF 7319; PILERUAFAC LF 7319; PILERUAFAC LF-7319; PILERUAFAC LF/7319; PILERUAFAC 7319; PILERUAFAC LF; pıleruafac lf 7319; pıleruafac lf-7319; pıleruafac lf/7319; pıleruafac 7319; pıleruafac lf; Pıleruafac Lf 7319; Pıleruafac Lf-7319; Pıleruafac Lf/7319; Pıleruafac 7319; Pıleruafac Lf

 

 

 

 

PLURAFAC LF 7319
Plurafac® LF 7319
Ürün Grupları
Noniyonik Yüzey Aktif Maddeler
Alt Ürün Grupları
Düşük Köpüren Noniyonik Yüzey Aktif Maddeler
fonksiyon
Noniyonik Yüzey Aktif Madde
Teslim Şekli
Sıvı
Kimyasal Tanım
Yağ alkolü alkoksilat, modifiye
Uygulama
Bulaşık
Yemek Servisi ve Mutfak Hijyeni
Ticari Çamaşırhane
Ürün etiketi
AB Eko Etiketi
BELGELER
Plurafac® LF 7319
Plurafac® LF 7319
Prospector'a ücretsiz katılın!
Prospector şunları yapabileceğiniz özel bir arama motorudur:
1000 Teknik Dokümana Erişim
Malzeme Verilerini ve Spesifikasyonlarını Değerlendirin
Fiyatlandırma ve Teknik Yardım Alın
ÜCRETSİZ HESABINIZI OLUŞTURUN

 

BASF belgelerini aşağıda belirtilen bölgelerde sunmaktadır:

 


Plurafac® LF-7319 düşük köpüklü noniyonik bir yüzey aktif maddedir. Alkoksillenmiş, ağırlıklı olarak dallanmamış yağlı alkollerden oluşur ve etilen oksit ile birlikte daha yüksek alken oksitler içerir. Bu ürünün viskozitesi 23 ° C'de yaklaşık 400 mPa.s'dir.

 

 

Plurafac LF tipleri düşük köpüklü noniyonik yüzey aktif maddelerdir.
Alkoksillenmiş, ağırlıklı olarak dallanmamış yağ alkollerinden oluşurlar ve
etilen oksit ile birlikte daha yüksek alken oksitler içerirler.
Plurafac LF 031, Plurafac LF 131, Plurafac LF 132, Plurafac LF 231 ve
Plurafac LF 431 bir alkil grubunda sona ermektedir.
Plurafac LF 1430 özel bir alkoksilattır.
Özellikleri
Plurafac LF tipleri berrak veya hafif bulutlu sıvılardır. Onların çoğu
önemli özellikler arka sayfadaki tabloda gösterilmiştir.
Tabloda verilen rakamlar temsili bir numunenin ortalamalarıdır
partilerin

 

 


a) Plurafac LF tipleri iç mekanlarda orijinallerinde saklanmalıdır.
sıkıca kapalı tutulmalıdır ambalaj.
b) Plurafac LF tipleri higroskopiktir ve suda çözünür,
sonuçta nemi çok çabuk emerler. Davullar sıkıca
onlardan her malzeme alındığında yeniden mühürlenir.
c) Depolama sıcaklığının önemli ölçüde düşmesine izin verilmemelidir
20 ° C'nin altında ve depolar aşırı ısınmamalıdır.
d) Plurafac LF tipleri düşük seviyede saklanırsa bulanıklaşabilir
ancak bunların performansları üzerinde hiçbir etkisi yoktur.
Bulanıklık, 40 - 50 ° C'ye ısıtılarak dağıtılabilir.
e) Katılaşmış veya yağış belirtisi gösteren sıvı,
yakl. 40 - 50 ° C işlenmeden önce.
f) Katılaşmış veya tortu oluşturmaya başlayan davullar
tercihen bir ısıtma kabininde hafif ısıtma ile sulandırılmalıdır. Sıcaklığın 50 - 60 ° C'yi geçmesine izin verilmemelidir. Bu
davullar harici elektrikli elemanlar tarafından ısıtıldığında da geçerlidir.
Dahili elektrikli elemanlar lokalize olduğundan kullanılmamalıdır.
neden oldukları sıcaklık anomalileri.
g) Plurafac LF tipleri, eğer varsa azot ile örtülmelidir
içeri girmelerini önlemek için ısıtılmış tanklarda (yaklaşık 50 ° C'de) saklanır
hava ile temas. Nazik, sürekli karıştırma, bunların önlenmesine yardımcı olur
elektrikli elemanlarla uzun süreli temas sonucu renk değiştirmiş veya
harici ısıtma bobinleri.
Malzemeler Tanklar ve variller için aşağıdaki malzemeler kullanılabilir.
a) AISI 316 Ti paslanmaz çelik
b) AISI 321 paslanmaz çelik
5
Raf ömrü Düzgün depolanmaları ve varillerin sıkıca kapalı tutulması koşuluyla,
Plurafac LF tipleri orijinallerinde en az iki yıl raf ömrüne sahiptir
ambalajı.
Plurafac LF 1430'un raf ömrü bir yıldır.
Uygulamalar
Plurafac LF tipleri diğer noniyonik yüzey aktif cisimleri ile uyumludur.
Lutensol® A N, AO, AP, AT, EC, F, GD, ON ve TO tiplerimiz ve
Pluronic® PE ve RPE türleri. Ayrıca aşağıdakilerle kombinasyon halinde de kullanılabilirler:
anyonik (Lutensit® A tipleri) ve katyonik yüzey aktif cisimleri (Protectol® KLC
tipleri). Sert sudaki kalsiyum, magnezyum veya diğer katyonlarla veya çözünür alkali tuzlarla, örneğin anyonik polimerlerle reaksiyona girmezler.
karboksimetil selüloz veya Sokalan® CP gibi polikarboksilatlar
ve PA tipleri.
Hidroksil grubunda sona eren aralıktaki ürünler dayanıklıdır
formaldehit, klor bileşikleri, fosfatlar, silikatlar, soda külü,
hidroklorik asit, fosforik asit, sitrik asit ve diğer birçok asit ve
alkali. Bu, Plurafac LF 1430 için de geçerlidir.
alkil grubu, şişe yıkama makinelerinde kullanılan deterjanlarda kullanılan alkaliler gibi güçlü alkalilere dayanıklıdır.
Hidroksil sonlu Plurafac LF tipleri yavaş yavaş sarıya dönebilir
orta derecede alkalin formülasyonlarda yüksek sıcaklıklarda uzun süreler, ancak bunun deterjan veya köpüklenme özellikleri üzerinde bir etkisi yoktur. Toz bulaşık makinesi deterjanlarında sararma genellikle önlenebilir,
yüzey aktif cisimlerini fosfatlara veya karbonatlara püskürtmek suretiyle
sodyum metasilikat, sodyum gibi diğer bileşenleri eklemeden önce
hidroksit ve çözünür bir dikloroizosiyanürat.
Hidroksil sonlu Plurafac LF tiplerinin tümü asitlere karşı dayanıklıdır, ancak
Plurafac LF 220, LF 221 ve LF 711 kullanım için en uygun ürünlerdir
kuvvetli asidik çözeltilerde.
Köpürme Noniyonik yüzey aktif cisimleri yüksek deterjanları, ıslatıcıları ile ünlüdür
Plurafac LF tipleri çok az köpük oluşturmalarıdır. Hatta bazıları
köpük oluşumunu engellemek için kullanılabilir.
Köpürme, yoğun mekanik işlem içeren temizleme işlemlerinde genellikle bir sorun olabilir. Köpürme davranışını tahmin etmek zordur
Toprak türünün etkisi, makine tipi, farklı sıcaklık ayarları ve formülasyondaki diğer bileşenlerin etkileri vb. nedeniyle standart test yöntemleri ile önceden yüzey aktif maddeler.
DIN 53902, Bölüm 1 veya
DIN 53902, Bölüm 2 ve ASTM'de açıklanan Ross-Miles yöntemi
D 1175-53, daha fazla karşılık gelen yöntemlerle kanıtlanmalıdır.
gerçek koşullara yakın.
Köpük oluşumunu test etmenin bir yöntemi,
uygulamada karşılaşılan koşullar, bulaşık makinesinde üretilen köpük seviyesini ölçmektir. Dönen sprey kolu köpükle yavaşlatılır,
ve devir hızı ne kadar yüksek olursa, o kadar az köpük bulunur. Karışımları
% 50 sodyumdan oluşan 5 birim Plurafac LF ve 95 birim inşaatçı
metasilikat,% 45 pentasodyum trifosfat ve% 5 soda külü
20 g / l'lik bir konsantrasyonda test edilmiştir. Köpük eklenerek teşvik edildi
10 cm3 yumurta.
Sonuçlar arka sayfadaki şemalarda gösterilmiştir. Bu yöntem,
beklenebilecek köpük seviyelerinin güvenilir bir şekilde gösterilmesi
uygulama.

 

 

Emniyet
Kullanmadan kaynaklanabilecek hiçbir kötü etki bilmiyoruz
Plurafac LF tipleri amaçlandıkları amaç için ve
mevcut uygulamaya uygun olarak işlenmesi.
Şimdiye kadar edindiğimiz deneyime göre ve diğer
elimizdeki bilgiler, Plurafac LF türleri zararlı değildir
gerektiği şekilde kullanılması şartıyla sağlık üzerindeki etkileri
kimyasalların taşınması için gerekli önlemlere ve
Güvenlik Veri Sayfalarımızda verilen bilgi ve tavsiyelere uyulur.
Kullanım Gözlerle tüm temas ve cilt ile uzun süreli temas,
kaçındı. Plurafac LF ile çalışırken koruyucu gözlük takılmalıdır.
seyreltilmemiş formları.
Daha ayrıntılı bilgi Güvenlik Veri Sayfalarımızda verilmiştir.
Ekoloji Plurafac LF tiplerinin çoğu ortalama minimum biyobozunurluğa sahiptir
4 Haziran'daki Alman Tensidverordnung'un gerektirdiği gibi en az% 90
1986.
Sadece Plurafac LF 700, LF 711, LF 1300 ve LF 1430% 80'den az
biyobozunur. Kullanımlarına genellikle,
atık olarak deşarj edilmez, ancak birçok ülkede mevzuat hala
boşaltılsalar bile belirli uygulamalarda kullanılmalarına izin vermek
kullandıktan sonra kanalizasyona gidiniz.
Fransız yönetmeliklerine göre 1994 tarihli 1227 sayılı Répression des fraudes,
tüm Plurafac LF tiplerinin deterjan ve temizleyiciler için kullanımı onaylanmıştır.
gıda sektörü, bulaşık makinesi deterjanları ve parlatıcı hariç
Plurafac LF 1300
Plurafac LF 1430

 

 

 


PLURAFAC LF 7319
Plurafac® LF 7319
Product Groups
Nonionic Surfactants
Sub Product Groups
Low-foaming Nonionic Surfactants
Function
Nonionic Surfactant
Form of Delivery
Liquid
Chemical Description
Fatty alcohol alkoxylate, modified
Application
Dishwashing
Food Service and Kitchen Hygiene
Commercial Laundry
Product Label
EU Ecolabel
DOCUMENTS
Plurafac® LF 7319
Plurafac® LF 7319
Join Prospector for free!
Prospector is a specialty search engine where you can:
Access 1000's of Technical Documents
Evaluate Material Data & Specifications
Get Pricing and Technical Assistance
CREATE YOUR FREE ACCOUNT

 

BASF makes their documentation available in the regions indicated below:

 


Plurafac® LF-7319 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 400 mPa·s at 23°C.

 

 

The Plurafac LF types are low-foaming nonionic surfactants.
They consist of alkoxylated, predominantly unbranched fatty alcohols, and
they contain higher alkene oxides alongside ethylene oxide.
The fatty alcohol chains of Plurafac LF 031,Plurafac LF 131, Plurafac LF 132,Plurafac LF 231 and
Plurafac LF 431 terminate in an alkyl group.
Plurafac LF 1430 is a special alkoxylate.
Properties
The Plurafac LF types are clear or slightly cloudy liquids. Their most
important properties are shown in the table overleaf.
The figures quoted in the table are averages from a representative sample
of batches

 

 


a) The Plurafac LF types should be stored indoors in their original
packaging, which should be kept tightly sealed.
b) The Plurafac LF types are hygroscopic and soluble in water, with the
result that they absorb moisture very quickly. Drums should be tightly
resealed each time material is taken from them.
c) The storage temperature should not be allowed to fall substantially
below 20 °C, and storerooms must not be overheated.
d) The Plurafac LF types can become cloudy if they are stored at low
temperatures, but this has no effect on their performance.
The cloudiness can be dissipated by heating them to 40 - 50 °C.
e) Liquid that has solidified or that shows signs of precipitation should be
heated to ca. 40 - 50 °C before it is processed.
f) Drums that have solidified or that have begun to form a sediment
should be reconstituted by gentle heating, preferably in a heating cabinet. The temperature must not be allowed to exceed 50 - 60 °C. This
also applies if drums are heated by external electrical elements.
Internal electrical elements should not be used because of the localized
anomalies in temperature that they cause.
g) The Plurafac LF types must be blanketed with nitrogen if they are
stored in heated tanks (at ca. 50 °C) to prevent them from coming into
contact with air. Gentle, constant stirring helps to prevent them being
discoloured as a result of prolonged contact with electrical elements or
external heating coils.
Materials The following materials can be used for tanks and drums.
a) AISI 316 Ti stainless steel
b) AISI 321 stainless steel
5
Shelf life Provided they are stored properly and drums are kept tightly sealed, the
Plurafac LF types have a shelf life of at least two years in their original
packaging.
Plurafac LF 1430 has a shelf life of one year.
Applications
The Plurafac LF types are compatible with other nonionic surfactants such
as our Lutensol® A N, AO, AP, AT, EC, F, GD, ON and TO types and our
Pluronic® PE and RPE types. They can also be used in combination with
anionic (Lutensit® A types) and cationic surfactants (Protectol® KLC
types). They do not react with calcium, magnesium or any of the other cations in hard water, nor with soluble alkali salts, anionic polymers such as
carboxymethyl cellulose, or polycarboxylates such as our Sokalan® CP
and PA types.
The products in the range that terminate in a hydroxyl group are resistant
to formaldehyde, chlorine compounds, phosphates, silicates, soda ash,
hydrochloric acid, phosphoric acid, citric acid and most other acids and
alkalis. This also applies to Plurafac LF 1430. Those that terminate in an
alkyl group are resistant to strong alkalis such as the alkalis used in detergents for bottle-washing machines.
The hydroxyl-terminated Plurafac LF types can gradually turn yellow over
prolonged periods at elevated temperatures in moderately alkaline formulations, but this has no effect on their detergency or foaming characteristics. Yellowing can often be avoided in powder dishwasher detergents,
etc., by spraying the surfactants onto the phosphates or carbonates
before adding the other ingredients such as sodium metasilicate, sodium
hydroxide and a soluble dichloroisocyanurate.
All of the hydroxyl-terminated Plurafac LF types are resistant to acids, but
Plurafac LF 220, LF 221 and LF 711 are the most suitable products for use
in strongly acidic solutions.
Foaming Nonionic surfactants are renowned for their high detergency, wetting
power and soil-dispersing capacity, but the distinguishing feature of the
Plurafac LF types is that they form very little foam. Some of them can even
be employed to inhibit foam formation.
Foaming can often be a problem in cleaning processes that involve intensive mechanical action. It is difficult to predict the foaming behaviour of
surfactants in advance with standard test methods because of the influence of the type of soil, the type of machinery, different temperature settings and the effects of the other ingredients in the formulation, etc. The
results obtained by the beater method described in DIN 53902, Part 1, or
the Ross-Miles method described in DIN 53902, Part 2, and ASTM
D 1175-53, have to be substantiated with methods that correspond more
closely to real conditions.
One method of testing foam formation which closely corresponds to the
conditions encountered in practice is to measure the level of foam produced in a dishwasher. The rotating spray arm is slowed down by foam,
and the higher the rate of revolution, the less foam is present. Mixtures of
5 parts of Plurafac LF and 95 parts of builder consisting of 50 % sodium
metasilicate, 45 % pentasodium triphosphate and 5 % soda ash were
tested at a concentration of 20 g/l. Foaming was encouraged by adding
10 cm3 of egg.
The results are shown in the diagrams overleaf. This method gives a
reliable indication of the levels of foaming that can be expected in
practice.

 

 

Safety
We know of no ill effects that could have resulted from using the
Plurafac LF types for the purpose for which they are intended and from
processing them in accordance with current practice.
According to the experience that we have gained up to now and other
information at our disposal, the Plurafac LF types do not exert any harmful
effects on health, provided that they are used properly, due attention is
given to the precautions necessary for handling chemicals, and the
information and advice given in our Safety Data Sheets are observed.
Handling All contact with the eyes and prolonged contact with the skin should be
avoided. Safety glasses should be worn when handling the Plurafac LF
types in their undiluted form.
Further details are given in our Safety Data Sheets.
Ecology Most of the Plurafac LF types have an average minimum biodegradability
of at least 90 %, as required by the German Tensidverordnung of 4 June
1986.
Only Plurafac LF 700, LF 711, LF 1300 and LF 1430 are less than 80 %
biodegradable. Their use is generally allowed in applications in which they
are not discharged as effluent, but legislation in many countries does still
permit them to be used in certain applications even if they are discharged
into the drains after use.
According to French regulations Répression des fraudes, No. 1227, of 1994,
all Plurafac LF types are approved for use in detergents and cleaners for the
food sector, dishwasher detergents and rinse aids, except for
Plurafac LF 1300
Plurafac LF 1430

 

 

 

 

PLURAFAC LF 7319
Plurafac® LF 7319
Groupes de produits
Tensioactifs non ioniques
Sous-groupes de produits
Tensioactifs non ioniques à faible mousse
Une fonction
Tensioactif non ionique
Forme de livraison
Liquide
Description chimique
Alcoxylate d'alcool gras, modifié
Application
Vaisselle
Service alimentaire et hygiène de la cuisine
Blanchisserie commerciale
Étiquette du produit
Ecolabel européen
DOCUMENTS
Plurafac® LF 7319
Plurafac® LF 7319
Rejoignez Prospector gratuitement!
Prospector est un moteur de recherche spécialisé où vous pouvez:
Accédez à des milliers de documents techniques
Évaluer les données et les spécifications des matériaux
Obtenez des prix et une assistance technique
CRÉEZ VOTRE COMPTE GRATUIT

 

BASF vous présente la documentation dans les régions indiquées ci-dessous:

 


Plurafac® LF-7319 est un tensioactif non ionique à faible mousse. Il se compose d'alcools gras alcoxylés, principalement non ramifiés, et contient des oxydes d'alcène supérieur aux côtés de l'oxyde d'éthylène. Ce produit a une viscosité d'environ 400 mPa · s à 23 ° C.

 

 

Les types Plurafac LF sont des tensioactifs non ioniques à faible mousse.
Ils sont constitués d'alcools gras alcoxylés, principalement non ramifiés, et
ils contiennent des oxydes d'alcène supérieurs aux côtés de l'oxyde d'éthylène.
Les chaînes d'alcool gras de Plurafac LF 031, Plurafac LF 131, Plurafac LF 132, Plurafac LF 231 et
Plurafac LF 431 se termine par un groupe alkyle.
Plurafac LF 1430 est un alcoxylate spécial.
Propriétés
Les types Plurafac LF sont des liquides clairs ou légèrement troubles. Leur plus
les propriétés importantes sont indiquées dans le tableau au verso.
Les chiffres cités dans le tableau sont des moyennes d'un échantillon représentatif
de lots

 

 


a) Les types Plurafac LF doivent être stockés à l'intérieur dans leur
emballage, qui doit être bien fermé.
b) Les types Plurafac LF sont hygroscopiques et solubles dans l'eau, avec
ils absorbent l'humidité très rapidement. Les tambours doivent être bien serrés
rescellé chaque fois que du matériel leur est retiré.
c) La température de stockage ne doit pas baisser sensiblement
en dessous de 20 ° C, et les magasins ne doivent pas être surchauffés.
d) Les types de Plurafac LF peuvent devenir nuageux s'ils sont stockés à faible
températures, mais cela n'a aucun effet sur leurs performances.
La nébulosité peut être dissipée en les chauffant à 40 - 50 ° C.
e) Le liquide qui s'est solidifié ou qui montre des signes de précipitation doit être
chauffé à ca. 40 à 50 ° C avant traitement.
f) Fûts qui se sont solidifiés ou qui ont commencé à former un sédiment
doit être reconstitué par chauffage doux, de préférence dans une armoire chauffante. La température ne doit pas dépasser 50 - 60 ° C. Cette
s'applique également si les tambours sont chauffés par des éléments électriques externes.
Les éléments électriques internes ne doivent pas être utilisés en raison de la localisation
anomalies de température qu'elles provoquent.
g) Les types Plurafac LF doivent être recouverts d'azote s'ils sont
stockés dans des réservoirs chauffés (à environ 50 ° C) pour les empêcher d'entrer
contact avec l'air. Une agitation douce et constante permet d'éviter qu'ils ne soient
décoloré à la suite d'un contact prolongé avec des éléments électriques ou
serpentins de chauffage externes.
Matériaux Les matériaux suivants peuvent être utilisés pour les réservoirs et les fûts.
a) Acier inoxydable AISI 316 Ti
b) Acier inoxydable AISI 321
5
Durée de conservation À condition qu'ils soient stockés correctement et que les fûts soient bien fermés,
Les types Plurafac LF ont une durée de conservation d'au moins deux ans dans leur version d'origine
emballage.
Plurafac LF 1430 a une durée de vie d'un an.
Applications
Les types Plurafac LF sont compatibles avec d'autres tensioactifs non ioniques tels que
comme nos types Lutensol® A N, AO, AP, AT, EC, F, GD, ON et TO et nos
Types Pluronic® PE et RPE. Ils peuvent également être utilisés en combinaison avec
Tensioactifs anioniques (types Lutensit® A) et cationiques (Protectol® KLC
les types). Ils ne réagissent pas avec le calcium, le magnésium ou l'un des autres cations de l'eau dure, ni avec les sels alcalins solubles, les polymères anioniques tels que
carboxyméthylcellulose, ou polycarboxylates comme notre Sokalan® CP
et types de sonorisation.
Les produits de la gamme qui se terminent par un groupe hydroxyle sont résistants
au formaldéhyde, aux composés chlorés, aux phosphates, aux silicates, au carbonate de soude,
l'acide chlorhydrique, l'acide phosphorique, l'acide citrique et la plupart des autres acides et
alcalis. Cela vaut également pour Plurafac LF 1430. Ceux qui se terminent dans un
le groupe alkyle est résistant aux alcalis forts tels que les alcalis utilisés dans les détergents pour les machines à laver les bouteilles.
Les types Plurafac LF à terminaison hydroxyle peuvent progressivement jaunir
des périodes prolongées à des températures élevées dans des formulations modérément alcalines, mais cela n'a aucun effet sur leurs caractéristiques de détergence ou de moussage. Le jaunissement peut souvent être évité dans les détergents en poudre pour lave-vaisselle,
etc., en pulvérisant les tensioactifs sur les phosphates ou les carbonates
avant d'ajouter les autres ingrédients tels que le métasilicate de sodium, le sodium
hydroxyde et un dichloroisocyanurate soluble.
Tous les types de Plurafac LF à terminaison hydroxyle sont résistants aux acides, mais
Plurafac LF 220, LF 221 et LF 711 sont les produits les plus adaptés à l'utilisation
dans des solutions fortement acides.

 

Ataman Kimya A.Ş. © 2015 Tüm Hakları Saklıdır.