1-9 A-D E-G H-M N-P Q-S T-Z

SODYUM KSİLEN SÜLFONAT ( Sodium xylene sulfonate )

sodyum ksilen sülfonat, sodyum kısilen sülfonat, sodyumksilensülfonat,sodyumksilensulfonat, sxs, Eltesol SX 40, sodyum, ksilen, sülfonate,sodium, ksilen sülfonat, ksilen sülfonate, 
sodium xylene sulfonate, sodiumxylenesulfonate, sodium xylenesulfonate, sodium xylene sulphonate, sodium xylenesulphonate, sodiumxylenesulphonate, ksilen, kısilen, xylene, sulfonat, 
sulfonate, sulphonate,sulfate, hydrotope, hidrotop, solubilizer, çözücü, bulanıklık giderici; Sodium xylenesulphonate; Benzenesulfonic acid, dimethyl-;  Benzenesulfonic acid, dimethyl-, sodium salt;  sodium (xylenes and 4-ethylbenzene)sulfonate; sodium 3,4-dimethylbenzene-1-sulfonate
; sodium 3,4-dimethylbenzenesulfonate; sodium xylene sulfaonate; SODIUM XYLENE SULFONATE; SODIUM XYLENE SULPHONATE; Sodium xylensulfonate; xylene sulphonic acid, sodium salt

Sodium xylenesulphonate is a hydrotope available in Ataman Chemicals stock.

Sodyum ksilen sülfonat, Ataman Kimya stoklarında bulunan bir hidrotoptur.
Sodyum ksilensülfonat; Benzensülfonik asit, dimetil-; Benzensülfonik asit, dimetil-, sodyum tuzu; sodyum (ksilenler ve 4-etilbenzen) sülfonat; sodyum 3,4-dimetilbenzen-1-sülfonat
; sodyum 3,4-dimetilbenzensülfonat; sodyum ksilen sülfaonat; SODYUM XYLENE SÜLFONAT; SODYUM XYLENE SÜLFONAT; Sodyum ksilensülfonat; ksilen sülfonik asit, sodyum tuzu

Bir hidrotrop, hidrofobik bileşikleri sulu çözeltiler içinde misel çözme dışında başka yollarla çözen bir bileşiktir. Hidrotroplar tipik olarak hidrofilik bir kısımdan oluşur.
 ve bir hidrofobik kısım (yüzey aktif maddelere benzer), ancak hidrofobik kısım genellikle kendiliğinden topaklaşmaya neden olmak için çok küçüktür. Hidrotropların kritik bir
 konsantrasyonu yoktur
 üzerinde kendiliğinden topaklaşmanın kendiliğinden oluşmaya başladığı (kritik bir misel konsantrasyonuna (cmc) ve kritik bir misel konsantrasyonuna (cmc) sahip misel ve vezikül
 oluşturan yüzey aktif maddelerde olduğu gibi
 vezikül konsantrasyonu (CVC)). Bunun yerine, bazı hidrotroplar, agregasyon boyutunu kademeli olarak artırarak, aşamalı bir kendi kendine toplanma sürecinde toplanır. Bununla birlikte, 
birçok hidrotrop,
bir çözündürücü eklenmedikçe, kendi kendine toplanmış gibi görünmektedir. Hidrotropların örnekleri arasında üre, tosilat, kümensülfonat ve ksilensülfonat yer alır.

Hidrotropi terimi ilk olarak Carl Neuberg tarafından oldukça yüksek konsantrasyonlarda alkali metal ilavesiyle bir çözünen maddenin çözünürlüğündeki artışı tanımlamak için öne sürüldü.
çeşitli organik asitlerin tuzları. Bununla birlikte, terim literatürde, çözünmeyen bileşikleri çözebilen, organik veya inorganik, sıvı veya katılar gibi misel oluşturmayan maddeleri
belirtmek için kullanılmıştır.

Geleneksel Neuberg hidrotropik tuzlarının (proto-tipi, sodyum benzoat) kimyasal yapısı genel olarak iki temel kısımdan, bir anyonik grup ve bir hidrofobik aromatik halka veya halka 
sisteminden oluşur. Anyonik grup, hidrotropik bir madde için bir ön koşul olan yüksek suda çözünürlük elde etmede rol oynar. Anyon veya metal iyonunun türü fenomen üzerinde küçük bir
 etkiye sahip görünüyordu. Öte yandan, hidrofobik kısmın düzlemselliği, hidrotropik çözünme mekanizmasında önemli bir faktör olarak vurgulanmıştır.


Bir hidrotrop oluşturmak için aromatik bir hidrokarbon çözücü sülfonatlanır ve bir aromatik sülfonik asit oluşturulur. Daha sonra bir baz ile nötralize edilir.

Katkı maddeleri, belirli bir çözücü içinde bir çözünen maddenin çözünürlüğünü artırabilir veya azaltabilir. Çözünürlüğü artıran bu tuzların çözünen maddede 'tuz' olduğu ve azaltan tuzların
çözünebilirlik çözünen maddeyi "tuzdan arındırır". Bir katkı maddesinin etkisi, suyun yapısı üzerindeki etkisine veya çözücü su molekülleri ile rekabet etme kabiliyetine çok bağlıdır. Bir çözünen katkı maddesinin başka bir çözünen maddenin çözünürlüğü üzerindeki etkisinin uygun bir kantitasyonu, Setschetow denklemi
Uygulamalar
Hidrotroplar, yüzey aktif maddelerin daha konsantre formülasyonlarına izin vermek için temizlik ve kişisel bakım ürünü formülasyonlarında endüstriyel ve ticari olarak kullanılmaktadır. ABD'de yılda yaklaşık 29.000 metrik ton üretiliyor (yani üretiliyor ve ithal ediliyor). Avrupa ve Avustralya'da yıllık üretim (artı ithalat) sırasıyla yaklaşık 17.000 ve 1.100 metrik tondur.
Hidrotrop içeren yaygın ürünler arasında çamaşır deterjanları, yüzey temizleyicileri, bulaşık yıkama deterjanları, sıvı sabunlar, şampuanlar ve saç kremleri bulunur.
formülü stabilize etmek, viskoziteyi ve bulutlanma noktasını değiştirmek, düşük sıcaklıklarda faz ayrılmasını azaltmak ve köpürmeyi sınırlamak için% 0.1-15 konsantrasyonlarda kullanılır.
Endüstriyel ve ticari amaçlarla kullanılan Hidrotroplara örnekler:
Toluen sülfonik asit, Na tuzu CAS # 12068-03-0
Toluen sülfonik asit, K tuzu CAS # 16106-44-8
30526-22-8
Ksilen sülfonik asit, Na tuzu 1300-72-7
827-21-4
Ksilen sülfonik asit, amonyum tuzu: CAS # 26447-10-9
Ksilen sülfonik asit, K tuzu: CAS # 30346-73-7
Ksilen sülfonik asit, Ca tuzu: CAS # 28088-63-3
Kümen sülfonik asit, Na tuzu: CAS # 28348-53-0
32073-22-6
Kümen sülfonik asit, amonyum tuzu: CAS # 37475-88-0
Sodyum Ksilen Sülfonat, şampuanlara genellikle kalınlaştırıcı bir ajan olarak eklenen bir yüzey aktif maddedir; genellikle şampuanlar olmak üzere kişisel bakım ürünlerinde bulunur. 
Ataman'a göre, formülün daha kolay yayılmasına yardımcı olan ve etkili temizlik sağlayan bir berraklaştırıcı veya ıslatıcı madde olarak hizmet etme kabiliyetine sahiptir. 
Eş anlamlılar: Ksilen sülfonik asitler, sodyum tuzları;
SXS; Sodyum dimetilbenzensülfonat. CAS No: 1300-72-7. Moleküler Formül: C8H9NaSO3 Molar Kütle: 208.21 g / mol.
Sodyum Ksilen Sülfonat* Bir yüzey aktif madde
Ataman Chemicals'a göre Sodyum Ksilen Sülfonat, formülün daha kolay yayılmasına yardımcı olan ve etkili temizlik sağlayan bir berraklaştırıcı veya ıslatıcı olarak hizmet verebilmesi nedeniyle özellikle şampuanlarda olmak üzere kişisel bakım ürünlerinde bulunan bir yüzey aktif maddedir. Hidrotrop veya organ olarak sınıflandırılır



A hydrotrope is a compound that solubilizes hydrophobic compounds in aqueous solutions by means other than micellar solubilization. Typically, hydrotropes consist of a hydrophilic part
and a hydrophobic part (similar to surfactants), but the hydrophobic part is generally too small to cause spontaneous self-aggregation. Hydrotropes do not have a critical concentration
above which self-aggregation spontaneously starts to occur (as found for micelle- and vesicle-forming surfactants, which have a critical micelle concentration (cmc) and a critical
vesicle concentration (cvc)). Instead, some hydrotropes aggregate in a step-wise self-aggregation process, gradually increasing aggregation size. However, many hydrotropes do not 
seem to self-aggregate at all, unless a solubilizate has been added. Examples of hydrotropes include urea, tosylate, cumenesulfonate and xylenesulfonate.
The term hydrotropy was originally put forward by Carl Neuberg[1] to describe the increase in the solubility of a solute by the addition of fairly high concentrations of alkali metal
salts of various organic acids. However, the term has been used in the literature to designate non-micelle-forming substances, either liquids or solids, organic or inorganic, capable 
of solubilizing insoluble compounds. The chemical structure of the conventional Neuberg's hydrotropic salts (proto-type, sodium benzoate) consists generally of two essential parts, an anionic group and a hydrophobic aromatic 
ring or ring system. The anionic group is involved in bringing about high aqueous solubility, which is a prerequisite for a hydrotropic substance. The type of anion or metal ion appeared 
to have a minor effect on the phenomenon. On the other hand, planarity of the hydrophobic part has been emphasized as an important factor in the mechanism of hydrotropic solubilization
To form a hydrotrope, an aromatic hydrocarbon solvent is sulfonated, creating an aromatic sulfonic acid. It is then neutralized with a base.
Additives may either increase or decrease the solubility of a solute in a given solvent. These salts that increase solubility are said to ‘salt in’ the solute and those salts that decrease
the solubility ‘salt out’ the solute. The effect of an additive depends very much on the influence it has on the structure of water or its ability to compete with the solvent water 
molecules.A convenient quantitation of the effect of a solute additive on the solubility of another solute may be obtained by the Setschetow equation
Applications: Hydrotropes are in use industrially and commercially in cleaning and personal care product formulations to allow more concentrated formulations of surfactants. About 29,000 metric 
tons are produced (i.e., manufactured and imported) annually in the US. Annual production (plus importation) in Europe and Australia is approximately 17,000 and 1,100 metric tons, 
respectively. Common products containing a hydrotropes include laundry detergents, surface cleaners, dishwashing detergents, liquid soaps, shampoos and conditioners.They are coupling agents, 
used at concentrations from 0.1-15% to stabilize the formula, modify viscosity and cloud-point, reduce phase separation in low temperatures, and limit foaming
Examples of Hydrotropes used for industrial and commercial purposes.
Toluene sulfonic acid, Na salt CAS# 12068-03-0
Toluene sulfonic acid, K salt CAS# 16106-44-8
30526-22-8
Xylene sulfonic acid, Na salt 1300-72-7
827-21-4
Xylene sulfonic acid, ammonium salt: CAS# 26447-10-9
Xylene sulfonic acid, K salt: CAS# 30346-73-7
Xylene sulfonic acid, Ca salt: CAS# 28088-63-3
Cumene sulfonic acid, Na salt: CAS# 28348-53-0
32073-22-6
Cumene sulfonic acid, ammonium salt: CAS# 37475-88-0
Sodium Xylene Sulfonate is a surfactant often added to shampoos as a thickening agent; it is often found in personal care products, primarily in shampoos. It is has ability to
 serve as a claritant or wetting agent that helps a formula spread more easily and ensure efficient cleansing, according to Johnson & Johnson. Synonyms: Xylenesulfonic acids, sodium salts; 
SXS ; Sodium dimethylbenzenesulfonate. CAS No: 1300-72-7. Molecular Formula: C8H9Na S O3 Molar Mass: 208.21 g/mol.
Sodium Xylene Sulfonate is a surfactant found in personal care products, primarily in shampoos, because of its ability to serve as a claritant or wetting agent that helps a formula spread
 more easily and ensure efficient cleansing, according to Johnson& Johnson. It is classified as a hydrotrope, or an organic compound that increases the ability of water to dissolve other
 molecules. Because of Sodium Xylene Sulfonate's dissolving abilities, it is often added to shampoos as a thickening agent that helps suspend other ingredients, clearing out the cloudy 
look of a formula* A surfactant. Functions:Sodium Xylene Sulfonate is a surfactant found in personal care products, primarily in shampoos, because of its ability to serve as a claritant or wetting agent that helps a formula spread
more easily and ensure efficient cleansing, according to Johnson& Johnson. It is classified as a hydrotrope, or an organic compound that increases the ability of water to dissolve other 
molecules. Because of Sodium Xylene Sulfonate's dissolving abilities, it is often added to shampoos as a thickening agent that helps suspend other ingredients, clearing out the cloudy 
look of a formula.Sodium Xylene Sulfonate is FDA approved, and is seen in shampoos and other products in concentrations up to 10%.
Safety Measures/Side Effects:Sodium Xylene Sulfonate is considered a low hazard ingredient by the Cosmetics Database, which has mild concerns regarding organ system toxicity and skin and eye irritation. One or more 
animal studies showed liver effects and skin irritation at high doses that are unlike those found in shampoos or other cleansing products.
The MSDS for Sodium Xylene Sulfonate finds that it is "Hazardous in case of inhalation (lung irritant). Slightly hazardous in case of skin contact (irritant, permeator), of eye contact
 (irritant), of ingestion, Non-corrosive for skin. Non-corrosive to the eyes. Non-corrosive for lungs." It notes that it is not carcinogenic or mutagenic.
Sodium xylene sulfonate 40% is used as a solubilizer, coupling agent and a cloud point depressant. It allows formulating cleaning compounds containing high percentages of inorganic builders without the use of organic solvents. As a formulation additive, sodium xylene sulfonate reduces viscosity and cloud point.  This product is readily biodegradable.
Ataman is here to serve your sodium xylene sulfonate 40% needs.  
Characteristics: Clear Light-Yellow Liquid
Applications  
All purpose cleaning
Heavy duty cleaning & industrial cleaning
Wax strippers
Complex dishwashing detergents
Hard surface care
Hydrotrope
Soluble concentrates
Suspension concentrates
SODIUM XYLENESULFONATE ICSC: 1514
Benzenesulfonic acid, dimethyl-, sodium salt
Dimethylbenzenesulfonic acid, sodium salt


Le xylènesulfonate de sodium est un hydrotope disponible dans le stock d'Ataman Chemicals.
Xylènesulfonate de sodium; Acide benzènesulfonique, diméthyl-; Acide benzènesulfonique, diméthyl-, sel de sodium; (xylènes et 4-éthylbenzène) sulfonate de sodium; 3,4-diméthylbenzène-1-sulfonate de sodium
; 3,4-diméthylbenzènesulfonate de sodium; xylène sulfaonate de sodium; SULFONATE DE SODIUM XYLÈNE; SULFONATE DE XYLÈNE DE SODIUM; Xylensulfonate de sodium; acide xylène sulfonique, sel de sodium

Un hydrotrope est un composé qui solubilise des composés hydrophobes dans des solutions aqueuses par des moyens autres que la solubilisation micellaire. En règle générale, les hydrotropes sont constitués d'une partie hydrophile
 et une partie hydrophobe (similaire aux tensioactifs), mais la partie hydrophobe est généralement trop petite pour provoquer une auto-agrégation spontanée. Les hydrotropes n'ont pas de concentration critique
 au-dessus duquel l'auto-agrégation commence spontanément (comme pour les tensioactifs formant des micelles et des vésicules, qui ont une concentration micellaire critique (cmc) et un
 concentration vésiculaire (cvc)). Au lieu de cela, certains hydrotropes s'agrègent dans un processus d'auto-agrégation par étapes, augmentant progressivement la taille de l'agrégation. Cependant, de nombreux hydrotropes ne
semblent s'auto-agréger du tout, à moins qu'un solubilisant n'ait été ajouté. Des exemples d'hydrotropes comprennent l'urée, le tosylate, le cumènesulfonate et le xylènesulfonate.
Le terme hydrotropie a été initialement proposé par Carl Neuberg pour décrire l'augmentation de la solubilité d'un soluté par l'ajout de concentrations assez élevées de métal alcalin.
 sels de divers acides organiques. Cependant, le terme a été utilisé dans la littérature pour désigner des substances non micellaires, liquides ou solides, organiques ou inorganiques, capables de solubiliser des composés insolubles.
La structure chimique des sels hydrotropes de Neuberg conventionnels (type proto, benzoate de sodium) se compose généralement de deux parties essentielles, un groupe anionique et un cycle ou système cyclique aromatique hydrophobe. Le groupe anionique est impliqué dans l'obtention d'une solubilité aqueuse élevée, qui est une condition préalable à une substance hydrotrope. Le type d'anion ou d'ion métallique semble avoir un effet mineur sur le phénomène. D'autre part, la planéité de la partie hydrophobe a été soulignée comme un facteur important dans le mécanisme de solubilisation hydrotropique
Pour former un hydrotrope, un solvant hydrocarboné aromatique est sulfoné, créant un acide sulfonique aromatique. Il est ensuite neutralisé avec une base.
Les additifs peuvent augmenter ou diminuer la solubilité d'un soluté dans un solvant donné. On dit que ces sels qui augmentent la solubilité «salent» le soluté et les sels qui diminuent
la solubilité «sel» le soluté. L'effet d'un additif dépend beaucoup de l'influence qu'il a sur la structure de l'eau ou de sa capacité à entrer en compétition avec les molécules d'eau du solvant.Une quantification commode de l'effet d'un additif de soluté sur la solubilité d'un autre soluté peut être obtenue par le Équation Setschetow
Applications: 
Les hydrotropes sont utilisés industriellement et commercialement dans des formulations de produits de nettoyage et de soins personnels pour permettre des formulations plus concentrées de tensioactifs. Environ 29 000 tonnes métriques sont produites (c'est-à-dire fabriquées et importées) chaque année aux États-Unis. La production annuelle (plus les importations) en Europe et en Australie est d'environ 17 000 et 1 100 tonnes métriques, respectivement.
Les produits courants contenant des hydrotropes comprennent les détergents à lessive, les nettoyants de surface, les détergents à vaisselle, les savons liquides, les shampooings et les revitalisants.
utilisé à des concentrations de 0,1 à 15% pour stabiliser la formule, modifier la viscosité et le point de trouble, réduire la séparation de phase à basse température et limiter le moussage.
Exemples d'hydrotropes utilisés à des fins industrielles et commerciales:
Acide toluène sulfonique, sel de sodium CAS # 12068-03-0
Acide toluène sulfonique, sel K CAS # 16106-44-8
30526-22-8
Acide xylène sulfonique, sel de Na 1300-72-7
827-21-4
Acide xylène sulfonique, sel d'ammonium: CAS # 26447-10-9
Acide xylène sulfonique, sel K: CAS # 30346-73-7
Acide xylène sulfonique, sel de Ca: CAS # 28088-63-3
Acide cumène sulfonique, sel de sodium: CAS # 28348-53-0
32073-22-6
Acide cumène sulfonique, sel d'ammonium: CAS # 37475-88-0
Le xylène sulfonate de sodium est un surfactant souvent ajouté aux shampooings comme agent épaississant; on le trouve souvent dans les produits de soins personnels, principalement dans les shampooings. Il a la capacité de servir de claritant ou d'agent mouillant qui aide une formule à se répandre plus facilement et à assurer un nettoyage efficace, selon Johnson & Johnson. Synonymes: Acides xylènesulfoniques, sels de sodium;
SXS; Diméthylbenzènesulfonate de sodium. No CAS: 1300-72-7. Formule moléculaire: C8H9Na S O3 Masse molaire: 208,21 g / mol.
Sulfonate de xylène de sodium
* Un surfactant
Le xylène sulfonate de sodium est un surfactant présent dans les produits de soins personnels, principalement dans les shampooings, en raison de sa capacité à servir de claritant ou d'agent mouillant qui aide une formule à se répandre plus facilement et à assurer un nettoyage efficace, selon Ataman Chemicals. Il est classé comme un hydrotrope ou un organe


Ataman Kimya A.Ş. © 2015 Tüm Hakları Saklıdır.