Tellurium Diethyldithiocarbamate (TDEC)
Tellurium Diethyldithiocarbamate (TDEC)
Vulcanization Accelerator
CAS No.: 20941-65-5
EC No.: 244-121-9
Molecular Formula: C20H40N4S8Te
Molecular Weight: 721
Synonyms:
tellurium diethyldithiocarbamate
Tetrakis(diethyldithiocarbamato-S,S')tellur
Tetrakis Tellurium
tetrakis(diethyldithio carbamato-S,S')tellurium
tetrakis(diethyldithiocarbamato-S,S')tellurium
Trade names
AKEMSPERSE TDEC 75
Perkacit TDEC
Tellurium diethyldithiocarbamate (TDEC) is an accelerator for natural- and styrene-butadiene rubber.
Tellurium diethyldithiocarbamate, TDEC, also referred to as Ethyl tellurac, is used in rubber processing as an accelerator that produces high modulus vulcanizates, particularly in IIR compounds.
TDEC is a highly effective dithiocarbamate accelerator for natural rubber, SBR, EPDM, NBR, etc.
Tellurium diethyldithiocarbamate is primarily active as a butyl rubber accelerator.
Tellurium diethyldithiocarbamate (TDEC) is also commonly used for NR, SBR, NBR, and EPDM compounds.
Generally, TDEC is used in combination with thiazole modifiers.
TDEC is an ultra-fast accelerator for natural and synthetic rubber compounds.
Tellurium diethyldithiocarbamate can also be used as an activator for thiazole and thiuram accelerators.
Tellurium diethyldithiocarbamate (TDEC) is suitable for making inner tubes of tires and soft tubes and isolating layers of wire and cables.
Tellurium diethyldithiocarbamate (TDEC) is available in powder and oiled powdered form.
The recommended addition of dosage of oiled powdered form is 0.1-2.0%.
TDEC is widely used to manufacture extruded EPDM rubber sponges for Automobile doors where partial rapid curing is desired before the rubber is blown.
The typical usage level in EPDM sponges is 0.3 parts.
Higher levels give a good compression set, but blooming can occur.
When combined with thiazoles, thurams, and dithiocarbamates, accelerators can accelerate the vulcanization of EPDM and IIR.
TDEC can shorten the vulcanization time.
TDEC is particularly suitable for high-oil-content soft rubber compounds such as low-hardness solid EPDM seals or spongy seals due to the reduction of the vulcanization rate caused by a great deal of softening oil.
TDEC is compatible with NBR, SBR, AR, and ECO.
TDEC is used in vehicle and building seals, vehicle hoses, steamproof & acidproof hoses, cable jackets, and insulated products.
Benefits of Tellurium diethyldithiocarbamate:
Allows very fast vulcanization
Non-staining, non-discoloring
Provides increased tensile strength and modulus
